HL7 Terminology (THO)
5.5.0 - Publication International flag

This page is part of the HL7 Terminology (v5.5.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

ValueSet: ActRelationshipStartsBeforeOrConcurrentWithEndOf

Official URL: http://terminology.hl7.org/ValueSet/v3-ActRelationshipStartsBeforeOrConcurrentWithEndOf Version: 3.0.0
Active as of 2014-08-07 Responsible: Health Level Seven International Computable Name: ActRelationshipStartsBeforeOrConcurrentWithEndOf
Other Identifiers: urn:ietf:rfc:3986#Uniform Resource Identifier (URI)#urn:oid:2.16.840.1.113883.1.11.20516

Copyright/Legal: This material derives from the HL7 Terminology THO. THO is copyright ©1989+ Health Level Seven International and is made available under the CC0 designation. For more licensing information see: https://terminology.hl7.org/license

Pro-forma value set for each head code in the ActRelationshipType code system; all codes present and future below the head code.

References

This value set is not used here; it may be used elsewhere (e.g. specifications and/or implementations that use this content)

Logical Definition (CLD)

 

Expansion

Expansion based on codesystem ActRelationshipType v4.0.0 (CodeSystem)

This value set contains 25 concepts.

CodeSystemDisplayDefinition
  SBEORSCWEhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypestarts before or concurrent with end of

A relationship in which the source act's effective time starts before or concurrent with the end of the target act's effective time.

Usage Note: Inverse code is SAEORSCWE

  OVERLAPhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypeoverlaps with

A relationship in which the source act's effective time overlaps the target act's effective time in any way.

UsageNote: This code is reflexive. Therefore its inverse code is itself.

  ECWhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypeends concurrent with

A relationship in which the source act's effective time ends with the end of the target act's effective time.

UsageNote: This code is reflexive. Therefore its inverse code is itself.

  CONCURRENThttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypeconcurrent with

A relationship in which the source act's effective time is the same as the target act's effective time.

UsageNote: This code is reflexive. Therefore its inverse code is itself.

  SBSECWEhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypestarts before start of, ends with

The source Act starts before the start of the target Act, and ends with the target Act.

UsageNote: Inverse code is SASECWE

  EDUhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypeends during

A relationship in which the source act ends within the target act's effective time (including end points, as defined in the act's effective times)

UsageNote: Inverse code is SBEEAE

  SBSEASEBEhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypecontains start of, ends before end of

The source Act contains the start of the target Act, and ends before the end of the target Act.

UsageNote: Inverse code is SASSBEEAS

  SCWSEBEhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypestarts with. ends before end of

The source Act starts with.the target Act and ends before the end of the target Act.

UsageNote: Inverse code is SCWSEAE

  SBEEAEhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypecontains end of

The source Act contains the end of the target Act.

UsageNote: Inverse code is EDU

  SASSBEEAShttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypestart after start of, contains end of

The source Act start after the start of the target Act, and contains the end of the target Act.

UsageNote: Inverse code is SBSEASEBE

  SBSEAEhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypecontains time of

The source Act contains the time of the target Act.

UsageNote: Inverse code is DURING

  SCWSEAEhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypestarts with, ends after end of

The source Act starts with the target Act, and ends after the end of the target Act.

  SBSEAShttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypecontains start of

The source Act contains the start of the target Act.

UsageNote: Inverse code is SDU

  SCWhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypestarts concurrent with

A relationship in which the source act's effective time starts with the start of the target act's effective time.

UsageNote: This code is reflexive. Therefore its inverse code is itself.

  SCWEhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypestarts concurrent with end of

The source Act starts when the target act ends (i.e. if we say "ActOne SCWE ActTwo", it means that ActOne starts when ActTwo ends, therefore ActOne is the source and ActTwo is the target).

UsageNote: Inverse code is SBSECWS

  SDUhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypestarts during

A relationship in which the source act starts within the target act's effective time (including end points, as defined in the act's effective times)

UsageNote: Inverse code is SBSEAS

  SBEhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypestarts before end of

The source Act starts before the end of the target Act (i.e. if we say "ActOne SBE ActTwo", it means that ActOne starts before the end of ActTwo, therefore ActOne is the source and ActTwo is the target).

UsageNote: Inverse code is EAS

  EBEhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypeends before end of

The source Act ends before the end of the target Act (i.e. if we say "ActOne EBE ActTwo", it means that ActOne ends before the end of ActTwo, therefore ActOne is the source and ActTwo is the target).

UsageNote: Inverse code is EAE

  SBSEBEhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypestarts before start of, ends before end of

The source Act starts before the start of the target Act, and ends before the end of the target Act.

UsageNote: Inverse code is SASEAE

  EBSORECWShttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypeends before or concurrent with start of

A relationship in which the source act's effective time ends before or concurrent with the start of the target act's effective time.

Usage Note: Inverse code is EASORECWS

  ECWShttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypeends concurrent with start of

The source Act ends when the target act starts (i.e. if we say "ActOne ECWS ActTwo", it means that ActOne ends when ActTwo starts, therefore ActOne is the source and ActTwo is the target).

UsageNote: Inverse code is SCWE

  EBShttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypeends before start of

A relationship in which the source act ends before the target act starts.

UsageNote: Inverse code is SAE

  EBEORECWhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypeends before or concurrent with end of

A relationship in which the source act's effective time ends before or concurrent with the end of the target act's effective time.

Usage Note: Inverse code is EAEORECW

  SBSORSCWhttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypestarts before or concurrent with start of

A relationship in which the source act's effective time starts before or concurrent with the start of the target act's effective time.

Usage Note: Inverse code is SASORSCW

  SBShttp://terminology.hl7.org/CodeSystem/v3-ActRelationshipTypestarts before start of

A relationship in which the source act begins before the target act begins.

UsageNote: Inverse code is SAS


Explanation of the columns that may appear on this page:

Level A few code lists that FHIR defines are hierarchical - each code is assigned a level. In this scheme, some codes are under other codes, and imply that the code they are under also applies
System The source of the definition of the code (when the value set draws in codes defined elsewhere)
Code The code (used as the code in the resource instance)
Display The display (used in the display element of a Coding). If there is no display, implementers should not simply display the code, but map the concept into their application
Definition An explanation of the meaning of the concept
Comments Additional notes about how to use the code

History

DateActionCustodianAuthorComment
2023-11-14reviseTSMGMarc DuteauAdd standard copyright and contact to internal content; up-476
2022-10-18reviseTSMGMarc DuteauFixing missing metadata; up-349
2020-05-06reviseVocabulary WGTed KleinMigrated to the UTG maintenance environment and publishing tooling.
2014-08-07revise2014T2_2014-08-07_001289 (RIM release ID)CQI (Marc Hadley) (no record of original request)Pro-forma value set creation.