Properties

This code system defines the following properties for its concepts

CodeURITypeDescription
SpecializesCodingThe child code is a more narrow version of the concept represented by the parent code. I.e. Every child concept is also a valid parent concept. Used to allow determination of subsumption. Must be transitive, irreflexive, antisymmetric.
GeneralizesCodingInverse of Specializes. Only included as a derived relationship.
internalIdhttp://terminology.hl7.org/CodeSystem/utg-concept-properties#v3-internal-idcodeThe internal identifier for the concept in the HL7 Access database repository.
statushttp://hl7.org/fhir/concept-properties#statuscodeDesignation of a concept's state. Normally is not populated unless the state is retired.

Concepts

This case-sensitive code system http://terminology.hl7.org/CodeSystem/v3-DataOperation defines the following codes in a Is-A heirarchy:

LvlCodeDisplayDefinitioninternalIdstatus
1OPERATE operateAct on an object or objects.22873active
2  CREATE createFundamental operation in an Information System (IS) that results only in the act of bringing an object into existence. Note: The preceding definition is taken from the HL7 RBAC specification. There is no restriction on how the operation is invoked, e.g., via a user interface. For an HL7 Act, the state transitions per the HL7 Reference Information Model.22874active
2  DELETE deleteFundamental operation in an Information System (IS) that results only in the removal of information about an object from memory or storage. Note: The preceding definition is taken from the HL7 RBAC specification. There is no restriction on how the operation is invoked, e.g., via a user interface.22891active
2  EXECUTE executeFundamental operation in an IS that results only in initiating performance of a single or set of programs (i.e., software objects). Note: The preceding definition is taken from the HL7 RBAC specification. There is no restriction on how the operation is invoked, e.g., via a user interface.22892active
2  READ readFundamental operation in an Information System (IS) that results only in the flow of information about an object to a subject. Note: The preceding definition is taken from the HL7 RBAC specification. There is no restriction on how the operation is invoked, e.g., via a user interface.22875active
2  UPDATE reviseFundamental operation in an Information System (IS) that results only in the revision or alteration of an object. Note: The preceding definition is taken from the HL7 RBAC specification. There is no restriction on how the operation is invoked, e.g., via a user interface.22876active
3    APPEND appendFundamental operation in an Information System (IS) that results only in the addition of information to an object already in existence. Note: The preceding definition is taken from the HL7 RBAC specification. There is no restriction on how the operation is invoked, e.g., via a user interface.22877active
3    MODIFYSTATUS modify statusChange the status of an object representing an Act.22878active
4      ABORT abortChange the status of an object representing an Act to "aborted", i.e., terminated prior to the originally intended completion. For an HL7 Act, the state transitions per the HL7 Reference Information Model.22879active
4      ACTIVATE activateChange the status of an object representing an Act to "active", i.e., so it can be performed or is being performed, for the first time. (Contrast with REACTIVATE.) For an HL7 Act, the state transitions per the HL7 Reference Information Model.22880active
4      CANCEL cancelChange the status of an object representing an Act to "cancelled", i.e., abandoned before activation. For an HL7 Act, the state transitions per the HL7 Reference Information Model.22881active
4      COMPLETE completeChange the status of an object representing an Act to "completed", i.e., terminated normally after all of its constituents have been performed. For an HL7 Act, the state transitions per the HL7 Reference Information Model.22882active
4      HOLD holdChange the status of an object representing an Act to "held", i.e., put aside an Act that is still in preparatory stages. No action can occur until the Act is released. For an HL7 Act, the state transitions per the HL7 Reference Information Model.22883active
4      JUMP jumpChange the status of an object representing an Act to a normal state. For an HL7 Act, the state transitions per the HL7 Reference Information Model.22884active
4      NULLIFY nullifyChange the status of an object representing an Act to "nullified", i.e., treat as though it never existed. For an HL7 Act, the state transitions per the HL7 Reference Information Model.22885active
4      OBSOLETE obsoleteChange the status of an object representing an Act to "obsolete" when it has been replaced by a new instance. For an HL7 Act, the state transitions per the HL7 Reference Information Model.22886active
4      DEPRECATE deprecateFundamental operation in HL7 Standards Governance that results only in the addition of deprecation information to an object already in existence without changing the status of the object. Operation used internally in the maintenance and recordkeeping of HL7 terminology and standards artifacts.722877active
4      REACTIVATE reactivateChange the status of a formerly active object representing an Act to "active", i.e., so it can again be performed or is being performed. (Contrast with ACTIVATE.) For an HL7 Act, the state transitions per the HL7 Reference Information Model.22887active
4      RELEASE releaseChange the status of an object representing an Act so it is no longer "held", i.e., allow action to occur. For an HL7 Act, the state transitions per the HL7 Reference Information Model.22888active
4      RESUME resumeChange the status of a suspended object representing an Act to "active", i.e., so it can be performed or is being performed. For an HL7 Act, the state transitions per the HL7 Reference Information Model.22889active
4      SUSPEND suspendChange the status of an object representing an Act to **suspended**, i.e., so it is temporarily not in service.22890active
 <status value="active"/> <experimental value="false"/> <date value="2019-03-20"/> <publisher value="Health Level Seven International"/> <contact> <telecom> <system value="url"/> <value value="http://hl7.org"/> </telecom> <telecom> <system value="email"/> <value value="hq@HL7.org"/> </telecom> </contact> <description value="**** MISSING DESCRIPTION ****"/> <copyright value="This material derives from the HL7 Terminology THO. THO is copyright ©1989+ Health Level Seven International and is made available under the CC0 designation. For more licensing information see: https://terminology.hl7.org/license"/> <caseSensitive value="true"/> <hierarchyMeaning value="is-a"/> <content value="complete"/> <property> <extension url="http://terminology.hl7.org/StructureDefinition/ext-mif-relationship-symmetry"> <valueCode value="antisymmetric"/> </extension> <extension url="http://terminology.hl7.org/StructureDefinition/ext-mif-relationship-transitivity"> <valueCode value="transitive"/> </extension> <extension url="http://terminology.hl7.org/StructureDefinition/ext-mif-relationship-reflexivity"> <valueCode value="irreflexive"/> </extension> <extension url="http://terminology.hl7.org/StructureDefinition/ext-mif-relationship-isNavigable"> <valueBoolean value="true"/> </extension> <extension url="http://terminology.hl7.org/StructureDefinition/ext-mif-relationship-relationshipKind"> <valueCode value="Specializes"/> </extension> <extension url="http://terminology.hl7.org/StructureDefinition/ext-mif-relationship-inverseName"> <valueString value="Generalizes"/> </extension> <code value="Specializes"/> <description value="The child code is a more narrow version of the concept represented by the parent code. I.e. Every child concept is also a valid parent concept. Used to allow determination of subsumption. Must be transitive, irreflexive, antisymmetric."/> <type value="Coding"/> </property> <property> <extension url="http://terminology.hl7.org/StructureDefinition/ext-mif-relationship-symmetry"> <valueCode value="antisymmetric"/> </extension> <extension url="http://terminology.hl7.org/StructureDefinition/ext-mif-relationship-transitivity"> <valueCode value="transitive"/> </extension> <extension url="http://terminology.hl7.org/StructureDefinition/ext-mif-relationship-reflexivity"> <valueCode value="irreflexive"/> </extension> <extension url="http://terminology.hl7.org/StructureDefinition/ext-mif-relationship-isNavigable"> <valueBoolean value="true"/> </extension> <extension url="http://terminology.hl7.org/StructureDefinition/ext-mif-relationship-relationshipKind"> <valueCode value="Generalizes"/> </extension> <extension url="http://terminology.hl7.org/StructureDefinition/ext-mif-relationship-inverseName"> <valueString value="Specializes"/> </extension> <code value="Generalizes"/> <description value="Inverse of Specializes. Only included as a derived relationship."/> <type value="Coding"/> </property> <property> <code value="internalId"/> <uri value="http://terminology.hl7.org/CodeSystem/utg-concept-properties#v3-internal-id"/> <description value="The internal identifier for the concept in the HL7 Access database repository."/> <type value="code"/> </property> <property> <code value="status"/> <uri value="http://hl7.org/fhir/concept-properties#status"/> <description value="Designation of a concept's state. Normally is not populated unless the state is retired."/> <type value="code"/> </property> <concept> <code value="OPERATE"/> <display value="operate"/> <definition value="Act on an object or objects."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22873"/> </property> <concept> <code value="CREATE"/> <display value="create"/> <definition value="Fundamental operation in an Information System (IS) that results only in the act of bringing an object into existence. Note: The preceding definition is taken from the HL7 RBAC specification. There is no restriction on how the operation is invoked, e.g., via a user interface. For an HL7 Act, the state transitions per the HL7 Reference Information Model."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22874"/> </property> </concept> <concept> <code value="DELETE"/> <display value="delete"/> <definition value="Fundamental operation in an Information System (IS) that results only in the removal of information about an object from memory or storage. Note: The preceding definition is taken from the HL7 RBAC specification. There is no restriction on how the operation is invoked, e.g., via a user interface."/> <designation> <language value="en"/> <use> <system value="http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra"/> <code value="preferredForLanguage"/> </use> <value value="remove"/> </designation> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22891"/> </property> </concept> <concept> <code value="EXECUTE"/> <display value="execute"/> <definition value="Fundamental operation in an IS that results only in initiating performance of a single or set of programs (i.e., software objects). Note: The preceding definition is taken from the HL7 RBAC specification. There is no restriction on how the operation is invoked, e.g., via a user interface."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22892"/> </property> </concept> <concept> <code value="READ"/> <display value="read"/> <definition value="Fundamental operation in an Information System (IS) that results only in the flow of information about an object to a subject. Note: The preceding definition is taken from the HL7 RBAC specification. There is no restriction on how the operation is invoked, e.g., via a user interface."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22875"/> </property> </concept> <concept> <code value="UPDATE"/> <display value="revise"/> <definition value="Fundamental operation in an Information System (IS) that results only in the revision or alteration of an object. Note: The preceding definition is taken from the HL7 RBAC specification. There is no restriction on how the operation is invoked, e.g., via a user interface."/> <designation> <language value="en"/> <use> <system value="http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra"/> <code value="preferredForLanguage"/> </use> <value value="update"/> </designation> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22876"/> </property> <concept> <code value="APPEND"/> <display value="append"/> <definition value="Fundamental operation in an Information System (IS) that results only in the addition of information to an object already in existence. Note: The preceding definition is taken from the HL7 RBAC specification. There is no restriction on how the operation is invoked, e.g., via a user interface."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22877"/> </property> </concept> <concept> <code value="MODIFYSTATUS"/> <display value="modify status"/> <definition value="Change the status of an object representing an Act."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22878"/> </property> <concept> <code value="ABORT"/> <display value="abort"/> <definition value="Change the status of an object representing an Act to "aborted", i.e., terminated prior to the originally intended completion. For an HL7 Act, the state transitions per the HL7 Reference Information Model."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22879"/> </property> </concept> <concept> <code value="ACTIVATE"/> <display value="activate"/> <definition value="Change the status of an object representing an Act to "active", i.e., so it can be performed or is being performed, for the first time. (Contrast with REACTIVATE.) For an HL7 Act, the state transitions per the HL7 Reference Information Model."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22880"/> </property> </concept> <concept> <code value="CANCEL"/> <display value="cancel"/> <definition value="Change the status of an object representing an Act to "cancelled", i.e., abandoned before activation. For an HL7 Act, the state transitions per the HL7 Reference Information Model."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22881"/> </property> </concept> <concept> <code value="COMPLETE"/> <display value="complete"/> <definition value="Change the status of an object representing an Act to "completed", i.e., terminated normally after all of its constituents have been performed. For an HL7 Act, the state transitions per the HL7 Reference Information Model."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22882"/> </property> </concept> <concept> <code value="HOLD"/> <display value="hold"/> <definition value="Change the status of an object representing an Act to "held", i.e., put aside an Act that is still in preparatory stages. No action can occur until the Act is released. For an HL7 Act, the state transitions per the HL7 Reference Information Model."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22883"/> </property> </concept> <concept> <code value="JUMP"/> <display value="jump"/> <definition value="Change the status of an object representing an Act to a normal state. For an HL7 Act, the state transitions per the HL7 Reference Information Model."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22884"/> </property> </concept> <concept> <code value="NULLIFY"/> <display value="nullify"/> <definition value="Change the status of an object representing an Act to "nullified", i.e., treat as though it never existed. For an HL7 Act, the state transitions per the HL7 Reference Information Model."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22885"/> </property> </concept> <concept> <code value="OBSOLETE"/> <display value="obsolete"/> <definition value="Change the status of an object representing an Act to "obsolete" when it has been replaced by a new instance. For an HL7 Act, the state transitions per the HL7 Reference Information Model."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22886"/> </property> </concept> <concept> <code value="DEPRECATE"/> <display value="deprecate"/> <definition value="Fundamental operation in HL7 Standards Governance that results only in the addition of deprecation information to an object already in existence without changing the status of the object. Operation used internally in the maintenance and recordkeeping of HL7 terminology and standards artifacts."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="722877"/> </property> </concept> <concept> <code value="REACTIVATE"/> <display value="reactivate"/> <definition value="Change the status of a formerly active object representing an Act to "active", i.e., so it can again be performed or is being performed. (Contrast with ACTIVATE.) For an HL7 Act, the state transitions per the HL7 Reference Information Model."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22887"/> </property> </concept> <concept> <code value="RELEASE"/> <display value="release"/> <definition value="Change the status of an object representing an Act so it is no longer "held", i.e., allow action to occur. For an HL7 Act, the state transitions per the HL7 Reference Information Model."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22888"/> </property> </concept> <concept> <code value="RESUME"/> <display value="resume"/> <definition value="Change the status of a suspended object representing an Act to "active", i.e., so it can be performed or is being performed. For an HL7 Act, the state transitions per the HL7 Reference Information Model."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22889"/> </property> </concept> <concept> <code value="SUSPEND"/> <display value="suspend"/> <definition value="Change the status of an object representing an Act to **suspended**, i.e., so it is temporarily not in service."/> <property> <code value="status"/> <valueCode value="active"/> </property> <property> <code value="internalId"/> <valueCode value="22890"/> </property> </concept> </concept> </concept> </concept> </CodeSystem>