v2-0119
type: CodeSystem
node role: treeRoot
resource.id:
  value: v2-0119
domain resource.text:
  narrative.status:
    value: generated
  narrative.div: Properties Code URL Type Description status http://terminology.hl7.org/CodeSystem/utg-concept-properties#status code Status of the concept deprecated http://terminology.hl7.org/CodeSystem/utg-concept-properties#v2-table-deprecated code Version of HL7 in which the code was deprecated v2-concComment http://terminology.hl7.org/CodeSystem/utg-concept-properties#v2-concComment string V2 Concept Comment v2-concCommentAsPub http://terminology.hl7.org/CodeSystem/utg-concept-properties#v2-concCommentAsPub string V2 Concept Comment As Published HL7usageNotes http://terminology.hl7.org/CodeSystem/utg-concept-properties#HL7usageNotes string HL7 Concept Usage Notes This code system http://terminology.hl7.org/CodeSystem/v2-0119 defines the following codes: Code Display Definition V2 Concept Comment V2 Concept Comment As Published HL7 Concept Usage Notes AF Order/service refill request approval AF is a response to RF where the placer authorizing a refill or quantity of refills. Placer Applications . Placer Applications. AF is a response to RF where the placer authorizing a refill or quantity of refills. CA Cancel order/service request Cancel order/service request Placer or Filler Applications Placer or Filler Applications. A cancellation is a request by the placer for the filler, or the filler to the placer, not to do a previously ordered service. Confirmation of the cancellation request is provided by the filler or placer, e.g., a message with an ORC-1-order control value of CR. Typical responses include, but are not limited to, CR – Cancelled as requested, UC – Unable to Cancel. CH Child order/service Child order/service Placer or Filler Applications. Placer or Filler Applications. Used in conjunction with the PA - Parent order control code. Refer to PA order control code for discussion. Used in conjunction with the PA - Parent order control code. Refer to PA order control code for discussion. CN Combined result Combined result Filler Applications. Filler Applications. The combi…
code system.url:
  value: http://terminology.hl7.org/CodeSystem/v2-0119
code system.identifier:
  index: 0
  identifier.system:
    value: urn:ietf:rfc:3986
  identifier.value:
    value: urn:oid:2.16.840.1.113883.18.48
code system.version:
  value: 2.8.0
code system.name:
  value: OrderControlCodes
code system.title:
  value: orderControlCodes
code system.status:
  value: active
code system.experimental:
  value: false
code system.date:
  value: 2019-12-01
code system.publisher:
  value: HL7, Inc
code system.contact:
  index: 0
  contact detail.telecom:
    index: 0
    contact point.system:
      value: url
    contact point.value:
      value: http://www.hl7.org/
code system.description:
  value: HL7-defined code system of concepts which are used to determine the function of the order segment. Depending on the message, the action specified by one of these control codes may refer to an order or an individual service. Used in Version 2.x messaging of orders in the ORC segment.
code system.purpose:
  value: Underlying Master Code System for V2 table 0119 (Order Control Codes)
code system.copyright:
  value: Copyright HL7. Licensed under creative commons public domain
code system.case sensitive:
  value: true
code system.value set:
  value: http://terminology.hl7.org/ValueSet/v2-0119
  link: http://terminology.hl7.org/ValueSet/v2-0119
code system.hierarchy meaning:
  value: is-a
code system.compositional:
  value: false
code system.version needed:
  value: false
code system.content:
  value: complete
code system.property:
  index: 0
  code system.property.code:
    value: status
  code system.property.uri:
    value: http://terminology.hl7.org/CodeSystem/utg-concept-properties#status
  code system.property.description:
    value: Status of the concept
  code system.property.type:
    value: code
code system.property:
  index: 1
  code system.property.code:
    value: deprecated
  code system.property.uri:
    value: http://terminology.hl7.org/CodeSystem/utg-concept-properties#v2-table-deprecated
  code system.property.description:
    value: Version of HL7 in which the code was deprecated
  code system.property.type:
    value: code
code system.property:
  index: 2
  code system.property.code:
    value: v2-concComment
  code system.property.uri:
    value: http://terminology.hl7.org/CodeSystem/utg-concept-properties#v2-concComment
  code system.property.description:
    value: V2 Concept Comment
  code system.property.type:
    value: string
code system.property:
  index: 3
  code system.property.code:
    value: v2-concCommentAsPub
  code system.property.uri:
    value: http://terminology.hl7.org/CodeSystem/utg-concept-properties#v2-concCommentAsPub
  code system.property.description:
    value: V2 Concept Comment As Published
  code system.property.type:
    value: string
code system.property:
  index: 4
  code system.property.code:
    value: HL7usageNotes
  code system.property.uri:
    value: http://terminology.hl7.org/CodeSystem/utg-concept-properties#HL7usageNotes
  code system.property.description:
    value: HL7 Concept Usage Notes
  code system.property.type:
    value: string
code system.concept:
  index: 0
  element.id:
    value: 1359
  code system.concept.code:
    value: AF
  code system.concept.display:
    value: Order/service refill request approval
  code system.concept.definition:
    value: AF is a response to RF where the placer authorizing a refill or quantity of refills.
  code system.concept.property:
    index: 0
    code system.concept.property.code:
      value: v2-concComment
    code system.concept.property.value string:
      value: Placer Applications .
  code system.concept.property:
    index: 1
    code system.concept.property.code:
      value: v2-concCommentAsPub
    code system.concept.property.value string:
      value: Placer Applications. AF is a response to RF where the placer authorizing a refill or quantity of refills.
  code system.concept.property:
    index: 2
    code system.concept.property.code:
      value: status
    code system.concept.property.value code:
      value: A
code system.concept:
  index: 1
  element.id:
    value: 1360
  code system.concept.code:
    value: CA
  code system.concept.display:
    value: Cancel order/service request
  code system.concept.definition:
    value: Cancel order/service request
  code system.concept.designation:
    index: 0
    code system.concept.designation.language:
      value: de
    code system.concept.designation.use:
      coding.system:
        value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
      coding.code:
        value: preferredForLanguage
    code system.concept.designation.value:
      value: Auftrag stornieren
  code system.concept.property:
    index: 0
    code system.concept.property.code:
      value: v2-concComment
    code system.concept.property.value string:
      value: Placer or Filler Applications
  code system.concept.property:
    index: 1
    code system.concept.property.code:
      value: v2-concCommentAsPub
    code system.concept.property.value string:
      value: Placer or Filler Applications. A cancellation is a request by the placer for the filler, or the filler to the placer, not to do a previously ordered service. Confirmation of the cancellation request is provided by the filler or placer, e.g., a message with an ORC-1-order control value of CR. Typical responses include, but are not limited to, CR – Cancelled as requested, UC – Unable to Cancel.
  code system.concept.property:
    index: 2
    code system.concept.property.code:
      value: status
    code system.concept.property.value code:
      value: A
code system.concept:
  index: 2
  element.id:
    value: 1361
  code system.concept.code:
    value: CH
  code system.concept.display:
    value: Child order/service
  code system.concept.definition:
    value: Child order/service
  code system.concept.designation:
    index: 0
    code system.concept.designation.language:
      value: de
    code system.concept.designation.use:
      coding.system:
        value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
      coding.code:
        value: preferredForLanguage
    code system.concept.designation.value:
      value: nachgeordneter Auftrag
  code system.concept.property:
    index: 0
    code system.concept.property.code:
      value: v2-concComment
    code system.concept.property.value string:
      value: Placer or Filler Applications.

index: 1
code system.concept.property.code:
  value: v2-concCommentAsPub
code system.concept.property.value string:
  value: Placer or Filler Applications. Used in conjunction with the PA - Parent order control code. Refer to PA order control code for discussion.

index: 2
code system.concept.property.code:
  value: HL7usageNotes
code system.concept.property.value string:
  value: Used in conjunction with the PA - Parent order control code. Refer to PA order control code for discussion.

index: 3
code system.concept.property.code:
  value: status
code system.concept.property.value code:
  value: A

index: 3
element.id:
  value: 1362
code system.concept.code:
  value: CN
code system.concept.display:
  value: Combined result
code system.concept.definition:
  value: Combined result
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Kumulatives Ergebnis (zu mehreren Aufträgen)
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications. The combined result code provides a mechanism to transmit results that are associated with two or more orders. This situation occurs commonly in radiology reports when the radiologist dictates a single report for two or more exams represented as two or more orders. For example, knee and hand films for a rheumatoid arthritis patient might generate a single dictation on the part of the radiologist. When such results are reported the CN code replaces the RE code in all but the last ORC, and the results follow the last ORC and its OBR. An example follows of a single report following three ORCs: MSH|...<cr> PID|...<cr> ORC|CN|...<cr> OBR|1|A4461XA^HIS|81641^RAD|73666^Bilateral Feet|...<cr> ORC|CN|...<cr> OBR|2|A4461XB^HIS|81642^RAD|73642^Bilateral Hand PA|...<cr> ORC|RE|...<cr> OBR|3|A4461XC^HIS|81643^RAD|73916^Bilateral Knees|...<cr> OBX|1|CE|73916&IMP|1|Radiologist’s Impression|...<cr> OBX|2|CE|73642&IMP|1|Radiologist’s Impression|...<cr> OBX|3|FT|73642&GDT|1|Description|...<cr>
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 4
element.id:
  value: 1363
code system.concept.code:
  value: CP
code system.concept.display:
  value: Cancel process step
code system.concept.definition:
  value: Cancel process step
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications. The control code CP – Cancel process step should be used in the ORC-1 for communication Filler-to-Filler, e.g., LIS-to-Analyzer, to differentiate from code CA (Placer-to-Filler). The Filler should response with an acceptance of the cancellation using ORC-1 = CR and ORC-5 = CA.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 5
element.id:
  value: 1364
code system.concept.code:
  value: CR
code system.concept.display:
  value: Canceled as requested
code system.concept.definition:
  value: Canceled as requested
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftrag anweisungsgemäß storniert
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler or Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler or Placer Applications. A response by the filler or placer application that a request to cancel (CA by the placer application) was performed successfully.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: HL7usageNotes
  code system.concept.property.value string:
    value: A response by the filler or placer application that a request to cancel (CA by the placer application) was performed successfully.
code system.concept.property:
  index: 3
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 6
element.id:
  value: 1365
code system.concept.code:
  value: DC
code system.concept.display:
  value: Discontinue order/service request
code system.concept.definition:
  value: Discontinue order/service request
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftragsausführung abbrechen
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer or Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer or Filler Applications. A request by the placer for the filler, or the filler to the placer, to discontinue a previously requested service. The differentiation between discontinue and cancel is that discontinue effects the order/service and all future occurrences, cancel refers to just the present action. Typical responses include, but are not limited to, CR – Cancelled as requested, UC – Unable to Cancel.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 7
element.id:
  value: 1366
code system.concept.code:
  value: DE
code system.concept.display:
  value: Data errors
code system.concept.definition:
  value: Data errors
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Datenfehler
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer or Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer or Filler Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 8
element.id:
  value: 1367
code system.concept.code:
  value: DF
code system.concept.display:
  value: Order/service refill request denied
code system.concept.definition:
  value: Order/service refill request denied
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer Applications. In response to a Filler application requesting refill authorization (RF), DF indicates that the placer does not authorize refills for the order. ORC-16 Order Control Code reason may be used to indicate the reason for the request denial. Some suggested values include: AA Patient unknown to the provider AB Patient never under provider care AC Patient no longer under provider care AD Patient has requested refill too soon AE Medication never prescribed for the patient AF Patient should contact provider first AG Refill not appropriate Note that these values originate from the NCPDP SCRIPT Response Segment Code List Qualifiers. Materials Reproduced with the consent of ©National Council for Prescription Drug Programs, Inc. 1988, 1992, 2002 NCPDP.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 9
element.id:
  value: 1368
code system.concept.code:
  value: DR
code system.concept.display:
  value: Discontinued as requested
code system.concept.definition:
  value: Discontinued as requested
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftragsausführung anweisungsgemäß abgebrochen
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler or Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler or Placer Applications. The filler or placer, in response to a request to discontinue (DC from the placer or filler application), has discontinued the order/service.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: HL7usageNotes
  code system.concept.property.value string:
    value: The filler or placer, in response to a request to discontinue (DC from the placer or filler application), has discontinued the order/service.
code system.concept.property:
  index: 3
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 10
element.id:
  value: 1369
code system.concept.code:
  value: FU
code system.concept.display:
  value: Order/service refilled, unsolicited
code system.concept.definition:
  value: Order/service refilled, unsolicited
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications. FU notifies the placer that the filler issued a refill for the order at the patient's request.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: HL7usageNotes
  code system.concept.property.value string:
    value: FU notifies the placer that the filler issued a refill for the order at the patient's request.
code system.concept.property:
  index: 3
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 11
element.id:
  value: 1370
code system.concept.code:
  value: HD
code system.concept.display:
  value: Hold order request
code system.concept.definition:
  value: Hold order request
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftragsbearbeitung aussetzen
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer Applications. Typical responses include, but are not limited to, CR - Cancelled as requested, UC - Unable to Cancel.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: HL7usageNotes
  code system.concept.property.value string:
    value: Typical responses include, but are not limited to, CR - Cancelled as requested, UC - Unable to Cancel.
code system.concept.property:
  index: 3
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 12
element.id:
  value: 1371
code system.concept.code:
  value: HR
code system.concept.display:
  value: On hold as requested
code system.concept.definition:
  value: On hold as requested
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftragsbearbeitung anweisungsgemäß ausgesetzt
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 13
element.id:
  value: 1372
code system.concept.code:
  value: LI
code system.concept.display:
  value: Link order/service to patient care problem or goal
code system.concept.definition:
  value: Link order/service to patient care problem or goal
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer or Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer or Filler Applications. Refer to Chapter 12 Patient Care for complete discussion.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: HL7usageNotes
  code system.concept.property.value string:
    value: Refer to Chapter 12 Patient Care for complete discussion.
code system.concept.property:
  index: 3
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 14
element.id:
  value: 1373
code system.concept.code:
  value: MC
code system.concept.display:
  value: Miscellaneous Charge - not associated with an order
code system.concept.definition:
  value: Miscellaneous Charge - not associated with an order
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: applies to DFT^P03^DFT_P03 and DFT^P11^DFT_P11
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: applies to DFT^P03^DFT_P03 and DFT^P11^DFT_P11
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: HL7usageNotes
  code system.concept.property.value string:
    value: applies to DFT^P03^DFT_P03 and DFT^P11^DFT_P11
code system.concept.property:
  index: 3
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 15
element.id:
  value: 1374
code system.concept.code:
  value: NA
code system.concept.display:
  value: Number assigned
code system.concept.definition:
  value: Number assigned
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Nummer zugewiesen
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer Applications. There are three circumstances that involve requesting an order number (ORC-2-placer order number or ORC-3-filler order number): (1) When the filler application needs to request an ORC-3-filler order number from a centralized application (e.g., HIS). SN – The send order number code provides a mechanism for the filler to request an ORC-3-filler order number from some centralized application (called “other” in the table below), such as a central HIS, by sending an ORM message containing an ORC-1-order control value of SN. This ORC has a null ORC-3-filler order number and an ORC-2-placer order number created by the filler application when the filler originates the order. The order (SN type) message can be acknowledged by either one of two methods: a) By an order application acknowledgement message containing an ORC-1-order control value of OK. Then an unsolicited order message can be sent at a future time, containing an ORC with ORC-1-order control value of NA to provide the actual number assigned. b) By an order acknowledgement message containing an ORC-1-order control value of NA as described below. NA – The number assigned code allows the “other” application to notify the filler application of the newly-assigned filler order number. ORC-1-order control contains value of NA, ORC-2-placer order number (from the ORC with the SN value), and the newly-assigned filler order number. Code From ORC-2-Placer Order Number ORC-3-Filler Order Number SN filler application placer order number^filler application ID Null NA other application placer order number^filler application ID filler order number^filler application ID Note: Both the placer order number and the filler order number have the filler’s application ID (2) When the filler application needs to request an ORC-2-placer order number from some other application (e.g., Order Entry). SN – The send order number code provides a mechanism for the filler application to request an ORC-2-placer order number fr…
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 16
element.id:
  value: 1375
code system.concept.code:
  value: NR
code system.concept.display:
  value: Notification Received
code system.concept.definition:
  value: Notifies the Filler that the Placer received a cancellation, discontinuance, or other state change notice
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 17
element.id:
  value: 1376
code system.concept.code:
  value: NW
code system.concept.display:
  value: New order/service
code system.concept.definition:
  value: New order/service
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Neuer Auftrag
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer Applications. See comments for NA - Number Assigned.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: HL7usageNotes
  code system.concept.property.value string:
    value: See comments for NA - Number Assigned.
code system.concept.property:
  index: 3
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 18
element.id:
  value: 1377
code system.concept.code:
  value: OC
code system.concept.display:
  value: Order/service canceled
code system.concept.definition:
  value: Order/service canceled
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftrag storniert
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 19
element.id:
  value: 1378
code system.concept.code:
  value: OD
code system.concept.display:
  value: Order/service discontinued
code system.concept.definition:
  value: Order/service discontinued
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftragsausführung abgebrochen
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 20
element.id:
  value: 1379
code system.concept.code:
  value: OE
code system.concept.display:
  value: Order/service released
code system.concept.definition:
  value: Order/service released
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 21
element.id:
  value: 1380
code system.concept.code:
  value: OF
code system.concept.display:
  value: Order/service refilled as requested
code system.concept.definition:
  value: Order/service refilled as requested
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications. OF directly responds to the placer system's request for a refill.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: HL7usageNotes
  code system.concept.property.value string:
    value: OF directly responds to the placer system's request for a refill.
code system.concept.property:
  index: 3
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 22
element.id:
  value: 1381
code system.concept.code:
  value: OH
code system.concept.display:
  value: Order/service held
code system.concept.definition:
  value: Order/service held
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftragsbearbeitung ausgesetzt
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 23
element.id:
  value: 1382
code system.concept.code:
  value: OK
code system.concept.display:
  value: Order/service accepted & OK
code system.concept.definition:
  value: Order/service accepted & OK
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftrag akzeptiert
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications. See comments for NA - Number Assigned.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: HL7usageNotes
  code system.concept.property.value string:
    value: See comments for NA - Number Assigned.
code system.concept.property:
  index: 3
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 24
element.id:
  value: 1383
code system.concept.code:
  value: OP
code system.concept.display:
  value: Notification of order for outside dispense
code system.concept.definition:
  value: Notification of order for outside dispense
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer Applications. These order control codes are used to communicate an order between systems where the order is intended for informational purposes. For example, an order that will be performed by a vendor outside the enterprise of communicating systems. The communicating systems may need to maintain information relative to the order for clinical continuity, but no actions to perform the ordered service are intended. OP represents an informational version of NW, PY represents the informational-only version of RO. NW and RO table notes also apply to OP and PY, respectively.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 25
element.id:
  value: 1384
code system.concept.code:
  value: OR
code system.concept.display:
  value: Released as requested
code system.concept.definition:
  value: Released as requested
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftragsbearbeitung anweisungsgemäß wiederaufgenommen
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 26
element.id:
  value: 1385
code system.concept.code:
  value: PA
code system.concept.display:
  value: Parent order/service
code system.concept.definition:
  value: Parent order/service
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Hauptauftrag
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications. The parent (PA) and child (CH) order control codes allow the spawning of “child” orders from a “parent” order without changing the parent (original order). One or more ORC segments with an ORC-1-order control value of PA are followed by one or more ORC segments with an ORC-1-order control value of CH. Whether OBR segments must be present is determined by the value of ORC-6-response flag. For example, suppose that a microbiology culture produced two organisms and corresponding susceptibility reports. Then the sequence of segments would be as follows: (see figure 4-4) The assignment of placer order numbers in the parent-child paradigm depends on whether the placer or filler creates the child order and in the latter case, on whether the placer supports the SN/NA transaction. If the placer creates the child orders it will assign their placer order numbers according to its usual procedures. If the filler creates the child orders there are two possibilities: each child will inherit the placer order number of its parent, or the filler will use the SN/NA transaction to request that the placer assign a placer order number. In either case, the filler application creates the filler order numbers of the children according to its usual procedures. Whenever a child order is transmitted in a message the ORC segment’s ORC-8-parent is valued with the parent’s filler order number (if originating from the filler) and with the parent’s placer order number (if originating from the filler or if originating from the placer). The parent child mechanism can be used to “expand” a parent order (e.g., an order for three EKGs on successive mornings).
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 27
element.id:
  value: 1386
code system.concept.code:
  value: PR
code system.concept.display:
  value: Previous Results with new order/service
code system.concept.definition:
  value: Previous Results with new order/service
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer Applications. PR indicates that this ORC is part of an ORU structure containing previous observation, which is embedded in the order. At least two main use cases require that the complete results of the previous observations be transmitted with the order. • Diagnostic laboratories referring tests to another lab for either confirmation of results (HIV, etc.) or due to not being equipped to do the tests (genetic testing, etc.). • Diagnostic laboratories sending test results to Knowledge Bases for the automated generation of diagnostic comments for inclusion into the lab report.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 28
element.id:
  value: 1387
code system.concept.code:
  value: PY
code system.concept.display:
  value: Notification of replacement order for outside dispense
code system.concept.definition:
  value: Notification of replacement order for outside dispense
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer Applications. See comments for OP - Notification of order for outside dispense.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: HL7usageNotes
  code system.concept.property.value string:
    value: See comments for OP - Notification of order for outside dispense.
code system.concept.property:
  index: 3
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 29
element.id:
  value: 1388
code system.concept.code:
  value: RA
code system.concept.display:
  value: Recommendation Accepted
code system.concept.definition:
  value: Identifies that this previously recommended replacement order has been accepted
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer Applications: Used in the Recommendation Accepted message; includes the assigned placer order number for the accepted replacement order Filler Applications: Used in the acknowledgment response message to the Recommendation Accepted message
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: N

index: 30
element.id:
  value: 1389
code system.concept.code:
  value: RC
code system.concept.display:
  value: Recommended Change
code system.concept.definition:
  value: Identifies that this OBR represents a recommended replacement order
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications. Used in the recommendation message sent to the placer
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: N

index: 31
element.id:
  value: 1390
code system.concept.code:
  value: RD
code system.concept.display:
  value: Recommendation Declined
code system.concept.definition:
  value: Identifies that this previously sent recommended replacement order has been declined
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer Applications: Used in the Recommendation Declined message Filler Applications: Used in the acknowledgment response message to the Recommendation Declined message
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: N

index: 32
element.id:
  value: 1391
code system.concept.code:
  value: RE
code system.concept.display:
  value: Observations/Performed Service to follow
code system.concept.definition:
  value: Observations/Performed Service to follow
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Untersuchungsergebnisse folgen (in späteren Segmenten dieser Nachricht)
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer or Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer or Filler Applications. The observations-to-follow code is used to transmit patient-specific information with an order. An order detail segment (e.g., OBR) can be followed by one or more observation segments (OBX). Any observation that can be transmitted in an ORU message can be transmitted with this mechanism. When results are transmitted with an order, the results should immediately follow the order or orders that they support. The following example shows the sequence of segments for three Pharmacy orders. It illustrates the use of the RE code: Segment Order Control Comment MSH PID ORC NW First new order RXO First order segment ORC NW 2nd new order RXO 2nd order segment [ORC RE Patient-specific observation, optional in V 2.2 OBR] Observation OBR, optional in V 2.2 OBX An observation segment OBX Another observation segment OBX Another observation segment OBX Another observation segment ORC NW 3rd order RXO 3rd order segment In this version of HL7, results can be transmitted with an order as one or more OBX segments without the necessity of including the ORC and OBR segments. Observations can be transmitted in an ORU message without using an ORC. There are times when it is necessary to transmit information not included in the OBR segments of the ORU message. In this case, it is recommended that the ORC be included in the ORU message. The order control value of RE is required only in ORM messages to indicate that an order is followed by observation results (OBX). The RE code is not necessary in the ORU message because it is expected that the OBR segments can be followed by observation results (OBX).
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 33
element.id:
  value: 1392
code system.concept.code:
  value: RF
code system.concept.display:
  value: Refill order/service request
code system.concept.definition:
  value: Refill order/service request
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer or Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer or Filler Applications. RF accommodates requests by either the filler or the placer. The filler may be requesting refill authorization from the placer. A placer system may be requesting a refill to be done by the filler system. Typical responses include, but are not limited to: For a Filler request AF – Order/service refill request approval, DF – Order/service refill request denied; for a Placer request RE – Observations/Performed Service to follow, UF – Unable to refill.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 34
element.id:
  value: 1393
code system.concept.code:
  value: RL
code system.concept.display:
  value: Release previous hold
code system.concept.definition:
  value: Release previous hold
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftragsberabeitung wiederaufnehmen
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 35
element.id:
  value: 1394
code system.concept.code:
  value: RO
code system.concept.display:
  value: Replacement order
code system.concept.definition:
  value: Replacement order
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Ersatzauftrag
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer or Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer or Filler Applications. A replacement is the substitution of one or more orders for one or more previously ordered services. The replaced orders are treated as though they were canceled. If and when an ordered service can be replaced are local site-specific determinations. Use the parent/child order control codes if the site specifies that the original order must remain intact. Do not use the replacement codes under this circumstance. For each order to be replaced, use an ORC-1-order control value of RP (request for a replacement going to a filler) or RU (an unsolicited replacement created by the filler) used by the filler to notify the placer and/or other systems). By local agreement, the ORC segment (with RP or RU) may be followed by its original order detail segment. The ORC segments (with RP or RU) must be followed by an ORC segment with an ORC-1-order control value of RO (indicating the replacement order). By local agreement, the ORC with the RO value may be followed by an order detail segment. For example, suppose that an ancillary application were replacing two OBR orders with three different orders. The sequence of segments would be as follows: Seg Order Control Comment ORC RU 1st replaced ORC OBR 1st replaced order’s detail segment ORC RU 2nd replaced ORC OBR 2nd replaced order’s detail segment ORC RO 1st replacement ORC OBR 1st replacement order’s detail segment ORC RO 2nd replacement ORC OBR 2nd replacement order’s detail segment ORC RO 3rd replacement ORC OBR 3rd replacement order’s detail segment Whether the OBR segments must be present is determined by the value of ORC-6-response flag. The described replacement method will handle all possible cases of replacement: one into one, many into one, one into many, and many into many. If the placer sent this request to the filler with two RPs, and this was a response back from the filler to the placer, the two RUs (replaced unsolicited) would be two RQs (replaced as requested). (see figure 4-3) Seg Orde…
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 36
element.id:
  value: 1395
code system.concept.code:
  value: RP
code system.concept.display:
  value: Order/service replace request
code system.concept.definition:
  value: Order/service replace request
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftrag ersetzen
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer Applications. A replacement is the substitution of one or more orders for one or more previously ordered services. See comment 1 on RO – Replacement Order for further discussion. The order replace request code permits the order filler to replace one or more new orders with one or more new orders, at the request of the placer application. The rules for the order numbers in ORC segments with an order control value of RO are determined by the replacement type (RP or RU). In the case of the RU type (i.e., unsolicited replacement by the filler), the filler order number is generated as usual by the filler application. The placer order number is identical to the placer order number of the first transmitted ORC with an order control value of RU. In the case of the RP type (i.e., a replacement request from another application to the filler), the placer order number is generated by the placer application using the procedure for new orders. The filler order number is generated by the filler application using the procedure identical for new orders. If a replacement sequence is used in an ORU message (i.e., during results reporting), the following are the recommended segments to be used for the replacement orders: a) ORC with an order control value of RO b) Any OBR segments (can be replaced by any order detail segments) c) Optionally followed by observation result segments (OBX) d) NTE segments can appear after the OBR (or any order detail segment) or after an OBX segment as in a regular ORU message
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 37
element.id:
  value: 1396
code system.concept.code:
  value: RQ
code system.concept.display:
  value: Replaced as requested
code system.concept.definition:
  value: Replaced as requested
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftrag anweisungsgemäß ersetzt
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications. A replacement is the substitution of one or more orders for one or more previously ordered services. See comment 1 on RO – Replacement Order for further discussion. The order replace request code permits the order filler to replace one or more new orders with one or more new orders, at the request of the placer application. The replacement order code is sent by the filler application to another application indicating the exact replacement ordered service. It is used with the RP and RU order control codes as described above. The rules for the order numbers in ORC segments with an order control value of RO are determined by the replacement type (RP or RU). In the case of the RU type (i.e., unsolicited replacement by the filler), the filler order number is generated as usual by the filler application. The placer order number is identical to the placer order number of the first transmitted ORC with an order control value of RU. In the case of the RP type (i.e., a replacement request from another application to the filler), the placer order number is generated by the placer application using the procedure for new orders. The filler order number is generated by the filler application using the procedure identical for new orders. If a replacement sequence is used in an ORU message (i.e., during results reporting), the following are the recommended segments to be used for the replacement orders: a) ORC with an order control value of RO b) Any OBR segments (can be replaced by any order detail segments) c) Optionally followed by observation result segments (OBX) d) NTE segments can appear after the OBR (or any order detail segment) or after an OBX segment as in a regular ORU message
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 38
element.id:
  value: 1397
code system.concept.code:
  value: RR
code system.concept.display:
  value: Request received
code system.concept.definition:
  value: Request received
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Anforderung erhalten
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer or Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer or Filler Applications. Left in for backward compatibility. In the current version it is equivalent to an accept acknowledgment. The request-received code indicates that an order message has been received and will be processed later. The order has not yet undergone the processing that would permit a more exact response.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 39
element.id:
  value: 1398
code system.concept.code:
  value: RU
code system.concept.display:
  value: Replaced unsolicited
code system.concept.definition:
  value: Replaced unsolicited
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftrag ersetzt (ohne Anweisung)
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications. A replacement is the substitution of one or more orders for one or more previously ordered services. See comment 1 on RO – Replacement Order for further discussion. The unsolicited replacement code permits the filler application to notify another application without being requested from the placer application. The rules for the order numbers in ORC segments with an order control value of RO are determined by the replacement type (RP or RU). In the case of the RU type (i.e., unsolicited replacement by the filler), the filler order number is generated as usual by the filler application. The placer order number is identical to the placer order number of the first transmitted ORC with an order control value of RU. In the case of the RP type (i.e., a replacement request from another application to the filler), the placer order number is generated by the placer application using the procedure for new orders. The filler order number is generated by the filler application using the procedure identical for new orders. If a replacement sequence is used in an ORU message (i.e., during results reporting), the following are the recommended segments to be used for the replacement orders: a) ORC with an order control value of RO b) Any OBR segments (can be replaced by any order detail segments) c) Optionally followed by observation result segments (OBX) d) NTE segments can appear after the OBR (or any order detail segment) or after an OBX segment as in a regular ORU message
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 40
element.id:
  value: 1399
code system.concept.code:
  value: SC
code system.concept.display:
  value: Status changed
code system.concept.definition:
  value: Status changed
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Statusänderung
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer or Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer or Filler Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 41
element.id:
  value: 1400
code system.concept.code:
  value: SN
code system.concept.display:
  value: Send order/service number
code system.concept.definition:
  value: Send order/service number
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftrags- bzw. Bearbeitungsnummer zuweisen / übermitteln
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer Applications. See comments for NA - Number Assigned.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: HL7usageNotes
  code system.concept.property.value string:
    value: See comments for NA - Number Assigned.
code system.concept.property:
  index: 3
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 42
element.id:
  value: 1401
code system.concept.code:
  value: SQ
code system.concept.display:
  value: Supplemented as requested
code system.concept.definition:
  value: Supplementation confirmation message indicating that an order was supplemented as requested.
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: This code is used in the acknowledgment response to the request messages.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: N

index: 43
element.id:
  value: 1402
code system.concept.code:
  value: SR
code system.concept.display:
  value: Response to send order/service status request
code system.concept.definition:
  value: Response to send order/service status request
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftragsstatus (Antwort)
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 44
element.id:
  value: 1403
code system.concept.code:
  value: SS
code system.concept.display:
  value: Send order/service status request
code system.concept.definition:
  value: Send order/service status request
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftragsstatus senden
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 45
element.id:
  value: 1404
code system.concept.code:
  value: SU
code system.concept.display:
  value: Supplement this order
code system.concept.definition:
  value: Identifies existing orders to be supplemented in Supplementation Recommendation (filler to placer) and Supplementation Request (placer to filler) messages.
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: For example this code is used in the filler’s order message to identify an order that is missing a recommended order based on organizational protocol for example as described in the IHE Laboratory Communication (LCC) profile (LAB-6).
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: N

index: 46
element.id:
  value: 1405
code system.concept.code:
  value: UA
code system.concept.display:
  value: Unable to accept order/service
code system.concept.definition:
  value: Unable to accept order/service
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftragsannahme nicht möglich
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications. An unable to accept code is used when a new order cannot be accepted by the filler. Possible reasons include requesting a prescription for a drug which the patient is allergic to or for an order which requires certain equipment resources which are not available such that the order cannot be filled. Note that this is different from the communication level acceptance as defined within the MSA segment.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 47
element.id:
  value: 1406
code system.concept.code:
  value: UC
code system.concept.display:
  value: Unable to cancel
code system.concept.definition:
  value: Unable to cancel
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftragsstornierung nicht möglich
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler or Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler or Placer Applications. An unable-to-cancel code is used when the ordered service is at a point that it cannot be canceled by the placer or filler or when local rules prevent cancellation by the filler. The use of this code is dependent on the value of ORC-6-response flag. If the filler initiated the request to cancel and the placer is unable to cancel while the filler cannot proceed with the fulfillment of that order, then the necessary communication to resolve the conflict is outside the scope of these messages.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 48
element.id:
  value: 1407
code system.concept.code:
  value: UD
code system.concept.display:
  value: Unable to discontinue
code system.concept.definition:
  value: Unable to discontinue
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Abbrechen nicht möglich
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler or Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler or Placer Applications. An unable-to-discontinue code is used when the ordered service is at a point that it cannot be discontinued by the placer or filler or when local rules prevent discontinuance by the filler. The use of this code is dependent on the value of ORC-6-response flag. If the filler initiated the request to discontinue and the placer is unable to discontinue while the filler cannot proceed with the fulfillment of that order, then the necessary communication to resolve the conflict is outside the scope of these messages.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 49
element.id:
  value: 1408
code system.concept.code:
  value: UF
code system.concept.display:
  value: Unable to refill
code system.concept.definition:
  value: Unable to refill
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications. Negative response to RF Refill order/service request, indicating that the receiving application was not able to complete the refill request.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: HL7usageNotes
  code system.concept.property.value string:
    value: Negative response to RF Refill order/service request, indicating that the receiving application was not able to complete the refill request.
code system.concept.property:
  index: 3
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 50
element.id:
  value: 1409
code system.concept.code:
  value: UH
code system.concept.display:
  value: Unable to put on hold
code system.concept.definition:
  value: Unable to put on hold
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Aussetzen nicht möglich
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 51
element.id:
  value: 1410
code system.concept.code:
  value: UM
code system.concept.display:
  value: Unable to replace
code system.concept.definition:
  value: Unable to replace
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Ersetzen nicht möglich
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 52
element.id:
  value: 1411
code system.concept.code:
  value: UN
code system.concept.display:
  value: Unlink order/service from patient care problem or goal
code system.concept.definition:
  value: Unlink order/service from patient care problem or goal
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer or Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer or Filler Applications. Refer to Chapter 12 Patient Care for complete discussion.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: HL7usageNotes
  code system.concept.property.value string:
    value: Refer to Chapter 12 Patient Care for complete discussion.
code system.concept.property:
  index: 3
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 53
element.id:
  value: 1412
code system.concept.code:
  value: UR
code system.concept.display:
  value: Unable to release
code system.concept.definition:
  value: Unable to release
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Wiederaufnahme nicht möglich
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 54
element.id:
  value: 1413
code system.concept.code:
  value: UX
code system.concept.display:
  value: Unable to change
code system.concept.definition:
  value: Unable to change
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Änderung nicht möglich
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 55
element.id:
  value: 1414
code system.concept.code:
  value: XO
code system.concept.display:
  value: Change order/service request
code system.concept.definition:
  value: Change order/service request
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftrag ändern
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Placer Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 56
element.id:
  value: 1415
code system.concept.code:
  value: XR
code system.concept.display:
  value: Changed as requested
code system.concept.definition:
  value: Changed as requested
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftrag anweisungsgemäß geändert
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A

index: 57
element.id:
  value: 1416
code system.concept.code:
  value: XX
code system.concept.display:
  value: Order/service changed, unsol.
code system.concept.definition:
  value: Order/service changed, unsol.
code system.concept.designation:
  index: 0
  code system.concept.designation.language:
    value: de
  code system.concept.designation.use:
    coding.system:
      value: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    coding.code:
      value: preferredForLanguage
  code system.concept.designation.value:
    value: Auftrag geändert (ohne Anweisung)
code system.concept.property:
  index: 0
  code system.concept.property.code:
    value: v2-concComment
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 1
  code system.concept.property.code:
    value: v2-concCommentAsPub
  code system.concept.property.value string:
    value: Filler Applications.
code system.concept.property:
  index: 2
  code system.concept.property.code:
    value: status
  code system.concept.property.value code:
    value: A