HL7 Terminology
2.1.0 - Publication

This page is part of the HL7 Terminology (v2.1.0: Release) based on FHIR R4. The current version which supercedes this version is 5.2.0. For a full list of available versions, see the Directory of published versions

ValueSet: ObservationInterpretationProtocolInclusion

Summary

Defining URL:http://terminology.hl7.org/ValueSet/v3-ObservationInterpretationProtocolInclusion
Version:2.0.0
Name:ObservationInterpretationProtocolInclusion
Status:Active as of 2014-03-26
Definition:

The observation/test result is interpreted as being outside the inclusion range for a particular protocol within which the result is being reported.

Example: A positive result on a Hepatitis screening test.

Open Issue: We are not deprecating this value set at this time, but instead are leaving open the consideration of deprecation in the future. [Note: The concepts included in this value set have also been suggested for future deprecation, and there are no associated concept subdomains or bindings.]

OID:2.16.840.1.113883.1.11.19759 (for OID based terminology systems)
Source Resource:XML / JSON / Turtle

References

This value set is not used here; it may be used elsewhere (e.g. specifications and/or implementations that use this content)

Logical Definition (CLD)

This value set includes codes based on the following rules:

 

Expansion

This value set contains 39 concepts

All codes from system http://terminology.hl7.org/CodeSystem/v3-ObservationInterpretation

CodeDisplayDefinition
EXoutside thresholdThe observation/test result is interpreted as being outside the inclusion range for a particular protocol within which the result is being reported. **Example:** A positive result on a Hepatitis screening test. *Open Issue:* EX, HX, LX: These three concepts do not seem to meet a clear need in the vocabulary, and their use in observation interpretation appears likely to be covered by other existing concepts (e.g., A, H, L). The only apparent significant difference is their reference to use in protocols for exclusion of study subjects. These concepts/codes were proposed by RCRIM for use in the CTLaboratory message. They were submitted and approved in the November 2005 Harmonization cycle in proposal "030103C\_VOCAB\_RCRIM\_l\_quade\_RCRIM Obs Interp\_20051028154455". However, this proposal was not fully implemented in the vocabulary. The proposal recommended creation of the x\_ClinicalResearchExclusion domain in ObservationInterpretation with a value set including those three concepts/codes, but there is no subdomain of that name or equivalent with a binding to either of the value sets that contain these concepts/codes. Members of the OO WG have recently attempted to contact members of RCRIM regarding these concepts, both by email and at the recent WGM in Atlanta, without response. It is felt by OO that the best course of action to take at this time is to add this comprehensive Open Issue rather than deprecate these three concepts at this time, until further discussion is held.
HXabove high thresholdThe observation/test result is interpreted as being outside the inclusion range for a particular protocol within which the result is being reported. **Example:** A positive result on a Hepatitis screening test. *Open Issue:* EX, HX, LX: These three concepts do not seem to meet a clear need in the vocabulary, and their use in observation interpretation appears likely to be covered by other existing concepts (e.g., A, H, L). The only apparent significant difference is their reference to use in protocols for exclusion of study subjects. These concepts/codes were proposed by RCRIM for use in the CTLaboratory message. They were submitted and approved in the November 2005 Harmonization cycle in proposal "030103C\_VOCAB\_RCRIM\_l\_quade\_RCRIM Obs Interp\_20051028154455". However, this proposal was not fully implemented in the vocabulary. The proposal recommended creation of the x\_ClinicalResearchExclusion domain in ObservationInterpretation with a value set including those three concepts/codes, but there is no subdomain of that name or equivalent with a binding to either of the value sets that contain these concepts/codes. Members of the OO WG have recently attempted to contact members of RCRIM regarding these concepts, both by email and at the recent WGM in Atlanta, without response. It is felt by OO that the best course of action to take at this time is to add this comprehensive Open Issue rather than deprecate these three concepts at this time, until further discussion is held.
LXbelow low thresholdThe numeric observation/test result is interpreted as being below the low threshold value for a particular protocol within which the result is being reported. **Example:** A Total White Blood Cell Count falling below a protocol-defined threshold value of 3000/mm^3 *Open Issue:* EX, HX, LX: These three concepts do not seem to meet a clear need in the vocabulary, and their use in observation interpretation appears likely to be covered by other existing concepts (e.g., A, H, L). The only apparent significant difference is their reference to use in protocols for exclusion of study subjects. These concepts/codes were proposed by RCRIM for use in the CTLaboratory message. They were submitted and approved in the November 2005 Harmonization cycle in proposal "030103C\_VOCAB\_RCRIM\_l\_quade\_RCRIM Obs Interp\_20051028154455". However, this proposal was not fully implemented in the vocabulary. The proposal recommended creation of the x\_ClinicalResearchExclusion domain in ObservationInterpretation with a value set including those three concepts/codes, but there is no subdomain of that name or equivalent with a binding to either of the value sets that contain these concepts/codes. Members of the OO WG have recently attempted to contact members of RCRIM regarding these concepts, both by email and at the recent WGM in Atlanta, without response. It is felt by OO that the best course of action to take at this time is to add this comprehensive Open Issue rather than deprecate these three concepts at this time, until further discussion is held.
_GeneticObservationInterpretationGeneticObservationInterpretationCodes that specify interpretation of genetic analysis, such as "positive", "negative", "carrier", "responsive", etc.
CARCarrierThe patient is considered as carrier based on the testing results. A carrier is an individual who carries an altered form of a gene which can lead to having a child or offspring in future generations with a genetic disorder.
_ObservationInterpretationChangeObservationInterpretationChangeInterpretations of change of quantity and/or severity. At most one of B or W and one of U or D allowed.
BBetterThe current result or observation value has improved compared to the previous result or observation value (the change is significant as defined in the respective test procedure). \[Note: This can be applied to quantitative or qualitative observations.\]
DSignificant change downThe current result has decreased from the previous result for a quantitative observation (the change is significant as defined in the respective test procedure).
USignificant change upThe current result has increased from the previous result for a quantitative observation (the change is significant as defined in the respective test procedure).
WWorseThe current result or observation value has degraded compared to the previous result or observation value (the change is significant as defined in the respective test procedure). \[Note: This can be applied to quantitative or qualitative observations.\]
_ObservationInterpretationExceptionsObservationInterpretationExceptionsTechnical exceptions resulting in the inability to provide an interpretation. At most one allowed. Does not imply normality or severity.
<Off scale lowThe result is below the minimum detection limit (the test procedure or equipment is the limiting factor). Synonyms: Below analytical limit, low off scale.
>Off scale highThe result is above the maximum quantifiable limit (the test procedure or equipment is the limiting factor). Synonyms: Above analytical limit, high off scale.
IEInsufficient evidenceThere is insufficient evidence that the species in question is a good target for therapy with the drug. A categorical interpretation is not possible. \[Note: A MIC with "IE" and/or a comment may be reported (without an accompanying S, I or R-categorization).\]
_ObservationInterpretationNormalityObservationInterpretationNormalityInterpretation of normality or degree of abnormality (including critical or "alert" level). Concepts in this category are mutually exclusive, i.e., at most one is allowed.
AAbnormalThe result or observation value is outside the reference range or expected norm (as defined for the respective test procedure). \[Note: Typically applies to non-numeric results.\]
AACritical abnormalThe result or observation value is outside a reference range or expected norm at a level at which immediate action should be considered for patient safety (as defined for the respective test procedure). \[Note: Typically applies to non-numeric results. Analogous to critical/panic limits for numeric results.\]
HHCritical highThe result for a quantitative observation is above a reference level at which immediate action should be considered for patient safety (as defined for the respective test procedure). Synonym: Above upper panic limits.
LLCritical lowThe result for a quantitative observation is below a reference level at which immediate action should be considered for patient safety (as defined for the respective test procedure). Synonym: Below lower panic limits.
HHighThe result for a quantitative observation is above the upper limit of the reference range (as defined for the respective test procedure). Synonym: Above high normal
HUSignificantly highA test result that is significantly higher than the reference (normal) or therapeutic interval, but has not reached the critically high value and might need special attention, as defined by the laboratory or the clinician.
LLowThe result for a quantitative observation is below the lower limit of the reference range (as defined for the respective test procedure). Synonym: Below low normal
LUSignificantly lowA test result that is significantly lower than the reference (normal) or therapeutic interval, but has not reached the critically low value and might need special attention, as defined by the laboratory or the clinician.
NNormalThe result or observation value is within the reference range or expected norm (as defined for the respective test procedure). \[Note: Applies to numeric or non-numeric results.\]
_ObservationInterpretationSusceptibilityObservationInterpretationSusceptibilityInterpretations of anti-microbial susceptibility testing results (microbiology). At most one allowed.
IIntermediateBacterial strain inhibited in vitro by a concentration of an antimicrobial agent that is associated with uncertain therapeutic effect. Reference: CLSI (http://www.clsi.org/Content/NavigationMenu/Resources/HarmonizedTerminologyDatabase/Harmonized\_Terminolo.htm) Projects: ISO 20776-1, ISO 20776-2 \[Note 1: Bacterial strains are categorized as intermediate by applying the appropriate breakpoints in a defined phenotypic test system.\] \[Note 2: This class of susceptibility implies that an infection due to the isolate can be appropriately treated in body sites where the drugs are physiologically concentrated or when a high dosage of drug can be used.\] \[Note 3: This class also indicates a "buffer zone," to prevent small, uncontrolled, technical factors from causing major discrepancies in interpretations.\] \[Note 4: These breakpoints can be altered due to changes in circumstances (e.g., changes in commonly used drug dosages, emergence of new resistance mechanisms).\]
NCLNo CLSI defined breakpointUse when not enough clinical trial data published by the Clinical and Laboratory Standards Institutes (CLSI) is available to establish the breakpoints for susceptible / intermediate and resistant.
NSNon-susceptibleA category used for isolates for which only a susceptible interpretive criterion has been designated because of the absence or rare occurrence of resistant strains. Isolates that have MICs above or zone diameters below the value indicated for the susceptible breakpoint should be reported as non-susceptible. NOTE 1: An isolate that is interpreted as non-susceptible does not necessarily mean that the isolate has a resistance mechanism. It is possible that isolates with MICs above the susceptible breakpoint that lack resistance mechanisms may be encountered within the wild-type distribution subsequent to the time the susceptible-only breakpoint is set. NOTE 2: For strains yielding results in the "nonsusceptible" category, organism identification and antimicrobial susceptibility test results should be confirmed. Synonym: decreased susceptibility.
RResistantBacterial strain inhibited in vitro by a concentration of an antimicrobial agent that is associated with a high likelihood of therapeutic failure. Reference: CLSI (http://www.clsi.org/Content/NavigationMenu/Resources/HarmonizedTerminologyDatabase/Harmonized\_Terminolo.htm) Projects: ISO 20776-1, ISO 20776-2 \[Note 1: Bacterial strains are categorized as resistant by applying the appropriate breakpoints in a defined phenotypic test system.\] \[Note 2: This breakpoint can be altered due to changes in circumstances (e.g., changes in commonly used drug dosages, emergence of new resistance mechanisms).\]
SYN-RSynergy - resistantA category for isolates where the bacteria (e.g. enterococci) are not susceptible in vitro to a combination therapy (e.g., high-level aminoglycoside and cell wall active agent). This is predictive that this combination therapy will not be effective. *Usage Note:* Since the use of penicillin or ampicillin alone often results in treatment failure of serious enterococcal or other bacterial infections, combination therapy is usually indicated to enhance bactericidal activity. The synergy between a cell wall active agent (such as penicillin, ampicillin, or vancomycin) and an aminoglycoside (such as gentamicin, kanamycin or streptomycin) is best predicted by screening for high-level bacterial resistance to the aminoglycoside. *Open Issue:* The print name of the code is very general and the description is very specific to a pair of classes of agents, which may lead to confusion of these concepts in the future should other synergies be found.
SSusceptibleBacterial strain inhibited by in vitro concentration of an antimicrobial agent that is associated with a high likelihood of therapeutic success. Reference: CLSI (http://www.clsi.org/Content/NavigationMenu/Resources/HarmonizedTerminologyDatabase/Harmonized\_Terminolo.htm) Synonym (earlier term): Sensitive Projects: ISO 20776-1, ISO 20776-2 \[Note 1: Bacterial strains are categorized as susceptible by applying the appropriate breakpoints in a defined phenotypic system.\] \[Note 2: This breakpoint can be altered due to changes in circumstances (e.g., changes in commonly used drug dosages, emergence of new resistance mechanisms).\]
SDDSusceptible-dose dependentA category that includes isolates with antimicrobial agent minimum inhibitory concentrations (MICs) that approach usually attainable blood and tissue levels and for which response rates may be lower than for susceptible isolates. Reference: CLSI document M44-A2 2009 "Method for antifungal disk diffusion susceptibility testing of yeasts; approved guideline - second edition" - page 2.
SYN-SSynergy - susceptibleA category for isolates where the bacteria (e.g. enterococci) are susceptible in vitro to a combination therapy (e.g., high-level aminoglycoside and cell wall active agent). This is predictive that this combination therapy will be effective. *Usage Note:* Since the use of penicillin or ampicillin alone often results in treatment failure of serious enterococcal or other bacterial infections, combination therapy is usually indicated to enhance bactericidal activity. The synergy between a cell wall active agent (such as penicillin, ampicillin, or vancomycin) and an aminoglycoside (such as gentamicin, kanamycin or streptomycin) is best predicted by screening for high-level bacterial resistance to the aminoglycoside. *Open Issue:* The print name of the code is very general and the description is very specific to a pair of classes of agents, which may lead to confusion of these concepts in the future should other synergies be found.
ObservationInterpretationDetectionObservationInterpretationDetectionInterpretations of the presence or absence of a component / analyte or organism in a test or of a sign in a clinical observation. In keeping with laboratory data processing practice, these concepts provide a categorical interpretation of the "meaning" of the quantitative value for the same observation.
INDIndeterminateThe specified component / analyte, organism or clinical sign could neither be declared positive / negative nor detected / not detected by the performed test or procedure. *Usage Note:* For example, if the specimen was degraded, poorly processed, or was missing the required anatomic structures, then "indeterminate" (i.e. "cannot be determined") is the appropriate response, not "equivocal".
EEquivocalThe test or procedure was successfully performed, but the results are borderline and can neither be declared positive / negative nor detected / not detected according to the current established criteria.
NEGNegativeAn absence finding of the specified component / analyte, organism or clinical sign based on the established threshold of the performed test or procedure. \[Note: Negative does not necessarily imply the complete absence of the specified item.\]
NDNot detectedThe presence of the specified component / analyte, organism or clinical sign could not be determined within the limit of detection of the performed test or procedure.
POSPositiveA presence finding of the specified component / analyte, organism or clinical sign based on the established threshold of the performed test or procedure.
DETDetectedThe measurement of the specified component / analyte, organism or clinical sign above the limit of detection of the performed test or procedure.
ObservationInterpretationExpectationObservationInterpretationExpectationInterpretation of the observed result taking into account additional information (contraindicators) about the patient's situation. Concepts in this category are mutually exclusive, i.e., at most one is allowed.
EXPExpectedThis result has been evaluated in light of known contraindicators. Once those contraindicators have been taken into account the result is determined to be "Expected" (e.g., presence of drugs in a patient that is taking prescription medication for pain management).
UNEUnexpectedThis result has been evaluated in light of known contraindicators. Once those contraindicators have been taken into account the result is determined to be "Unexpected" (e.g., presence of non-prescribed drugs in a patient that is taking prescription medication for pain management).
ReactivityObservationInterpretationReactivityObservationInterpretationInterpretations of the presence and level of reactivity of the specified component / analyte with the reagent in the performed laboratory test.
NRNon-reactiveAn absence finding used to indicate that the specified component / analyte did not react measurably with the reagent.
RRReactiveA presence finding used to indicate that the specified component / analyte reacted with the reagent above the reliably measurable limit of the performed test.
WRWeakly reactiveA weighted presence finding used to indicate that the specified component / analyte reacted with the reagent, but below the reliably measurable limit of the performed test.

Explanation of the columns that may appear on this page:

Level A few code lists that FHIR defines are hierarchical - each code is assigned a level. In this scheme, some codes are under other codes, and imply that the code they are under also applies
Source The source of the definition of the code (when the value set draws in codes defined elsewhere)
Code The code (used as the code in the resource instance)
Display The display (used in the display element of a Coding). If there is no display, implementers should not simply display the code, but map the concept into their application
Definition An explanation of the meaning of the concept
Comments Additional notes about how to use the code

History

DateActionAuthorCustodianComment
2020-05-06reviseTed KleinVocabulary WGMigrated to the UTG maintenance environment and publishing tooling.
2014-03-26reviseVocabulary (Woody Beeler) (no record of original request)2014T1_2014-03-26_001283 (RIM release ID)Lock all vaue sets untouched since 2014-03-26 to trackingId 2014T1_2014_03_26